def
curStatus
Status of point's current value reading. The curVal
is only available when curStatus is "ok" or "stale". However a "stale" value should be used with caution since the local system does not have a fresh value. It is recommended that the curVal
tag is removed from a point when the curStatus is not "ok" nor "stale".
meta
enum
ok |
all is okay |
---|---|
stale |
the point's curVal is not fresh data |
fault |
a configuration or hardware problem - see |
down |
a communication or network problem - see |
disabled |
manual disable of the point or connector |
unknown |
we don't know anything (usually boot state) |
remoteFault |
point in remote system is fault |
remoteDown |
point in remote system is down |
remoteDisabled |
point in remote system is disabled |
remoteUnknown |
point in remote system is unknown |